Single-photon vacuum-ultraviolet laser-pulsed-field ionization-photoelectron studies of trans- and cis-1-bromopropenes

The vacuum-ultraviolet (VUV) pulsed-field ionization-photoelectron (VUV-PFI-PE) spectra of trans-1-bromopropene (trans-CH(3)CH[Double Bond]CHBr) and cis-1-bromopropene (cis-CH(3)CH[Double Bond]CHBr) have been measured in the energy region of 74 720-76 840 cm(-1). The simulation of fine structures observed in the origin VUV-PFI-PE vibrational bands of these molecules has provided the ionization energies (IEs) of trans-1-bromopropene and cis-1-bromopropene to be 74 779.3+/-2.0 cm(-1) (9.2715+/-0.0002 eV) and 75 140.2+/-2.0 cm(-1) (9.3162+/-0.0002 eV), respectively. The vibrational bands resolved in these VUV-PFI-PE spectra at energies 0-1700 cm(-1) above the IEs of trans-1-bromopropene and cis-1-bromopropene have been assigned based on theoretical vibrational frequencies and calculated Franck-Condon factors for the ionization transitions.     

Excess partial molar enthalpies,entropies, Gibbs energies,and volumes in aqueous dimethylsulfoxide

The excess partial molar enthalpies, the vapor pressures, and the densities of dimethylsulfoxide (DMSO)–H₂O mixtures were measured and the excess partial molar Gibbs energies and the partial molar volumes were calculated for DMSO and for H₂O. The values of the excess partial molar Gibbs energies for both DMSO and H₂O are negative over the entire composition range. The results for the water-rich region indicated that the presence of DMSO enhances the hydrogen bond network of H₂O. Unlike monohydric alcohols, however, the solute-solute interaction is repulsive in terms of the Gibbs energy. This was a result of the fact that the repulsion among solutes in terms of enthalpy surpassed the attraction in terms of entropy. The data in the DMSO-rich region suggest that DMSO molecules form clusters which protect H₂O molecules from exposure to the nonpolar alkyl groups of DMSO.     

Spectrophotometric determination of tannins in tea and beer samples with iron(III) and 1,10-phenanthroline as reagents

A simple and accurate spectrophotometric method is proposed for the determination of tannins in tea and beer samples based on the reduction of iron(III) to iron(II) by tannins at 80 degrees C for 20 min. The iron(II) was then reacted with 1,10-phenanthroline at pH 4.4 to form a coloured complex. Background correction could be effected by precipitating the tannins in the sample solution twice with gelatin and kaolin. Absorbance measurements were made at 540 nm and the calibration graph was linear from 0 to 5.5 micrograms ml-1 of tannic acid with a slope of 0.213 A p.p.m.-1. The precision for the determination of tannins in a tea sample containing 9.45% of tannins was 1.8%. Most of the ingredients commonly found in tea and beer samples do not interfere with the determination. Several tea and beer samples were analysed for their tannin content using the proposed method.     

Theoretical study of the Diels-Alder reactions between singlet (1Delta g) oxygen and acenes

The G3(MP2) method has been employed to study the 1,4-addition reactions between singlet oxygen and five acenes, including benzene, naphthalene, anthrecene, tetracene, and pentacene. In all, nine pathways between O(2) and the five acenes have been investigated. Our calculated results indicate that all nine pathways are concerted and exothermic and that the most reactive sites on the acenes are the center ring's meso-carbons. In addition, reactivity increases along the series benzene < naphthalene < anthrecene < tetracene < pentacene. This trend is identical to that of aromaticity for the five acenes. A correlation between reactivity and aromaticity is briefly rationalized with natural bond orbital (NBO) analysis and frontier molecular orbital (FMO) analysis. Furthermore, some experimental kinetics data from the literature supporting the calculated results are cited.     

Stoichiometric and catalytic oxidations of alkanes and alcohols mediated by highly oxidizing ruthenium-Oxo complexes bearing 6, 6'-dichloro-2,2'-bipyridine

The ruthenium(II) complex cis-[Ru(6, 6'-Cl(2)bpy)(2)(OH(2))(2)](CF(3)SO(3))(2) (1) is a robust catalyst for C-H bond oxidations of hydrocarbons, including linear alkanes, using tert-butyl hydroperoxide (TBHP) as terminal oxidant. Alcohols can be oxidized by the "1 + TBHP" protocol to the corresponding aldehydes/ketones with high product yields at ambient temperature. Oxidation of 1 with Ce(IV) in aqueous solution affords cis-[Ru(VI)(6, 6'-Cl(2)bpy)(2)O(2)](2+), which is isolated as a green/yellow perchlorate salt (2). Complex 2 is a powerful stoichiometric oxidant for cycloalkane oxidations under mild conditions. Oxidation of cis-decalin is highly stereoretentive; cis-decalinol is obtained in high yield, and formation of trans-decalinol is not observed. Mechanistic studies showing a large primary kinetic isotope effect suggest a hydrogen-atom abstraction pathway. The relative reactivities of cycloalkanes toward oxidation by 2 have been examined through competitive experiments, and comparisons with Gif-type processes are presented.     

Ethynylated N-phenylbenzimidazoles: Synthesis and thermal properties

Three diethynylated bisbenzimidazole prepolymers were synthesized and their polymerization characteristics examined. N-phenyl-substituted diethynylated bisbenzimidazoles melted between 250 and 265°C and had gel times of several seconds to several minutes. In contrast, an N-phenoxyphenyl diethynylated bisbenzimidazole melted at a temperature sufficiently low (ca. 150°C) to provide a 5-min gel time at 170°C and a 4-min gel time at 210°C. This material showed promise as a potential laminating resin and a brief screening of the prepolymer for this application was carried out. The polymers of both N-phenyl- and N-phenoxyphenyl-substituted diethynylated bisbenzimidazoles showed apparent degradation temperatures of 500°C or greater when examined by thermogravimetric analysis.     

Theoretical studies on the metathesis processes, (Tp(PH3)MR(eta 2-H[bond]CH3)]-->[Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe,Ru, and Os; R=H and CH3)

Theoretical calculations on the metathesis process, [Tp(PH3)MR(eta 2-H[bond]CH3)] --> [Tp(PH3)M(CH3)(eta 2-H[bond]R)] (M=Fe, Ru, and Os; R=H and CH3), have been systematically carried out to study their detailed reaction mechanisms. Other than the one-step mechanism via a four-center transition state and the two-step mechanism through an oxidative addition/reductive elimination pathway, a new one-step mechanism, with a transition state formed under oxidative addition, has been found. Based on the intrinsic reaction coordinate calculations, we found that the trajectories of the transferring hydrogen atom in the metathesis processes studied are similar to each other regardless of the nature of reaction mechanisms.     

Stir bar sorptive extraction based on restricted access material for the direct extraction of caffeine and metabolites in biological fluids

A biocompatible stir bar sorptive extraction (SBSE) device was prepared using an alkyl-diol-silica (ADS) restricted access material (RAM) as the SBSE coating. The RAM-SBSE bar was able to simultaneously fractionate the protein component from a biological sample, while directly extracting caffeine and its metabolites, overcoming the present disadvantages of direct sampling in biological matrices by SBSE, such as fouling of the extraction coating by proteins. Desorption of the analytes was performed by stirring the bar in a water/ACN mixture (3/1, v/v) and subsequently reconcentrating the sample solution in water to enable HPLC-UV analysis to be performed. The limit of detection, based on a signal to noise ratio of 3, for caffeine was 25 ng/mL in plasma. The method was confirmed to be linear over the range of 0.5-100 microg/mL of caffeine with an average linear coefficient (R2) value of 0.9981. The injection repeatability and intra-assay precision of the method were evaluated over ten injections, resulting in a %RSD of approximately 8%. The RAM-SBSE device was robust (>50 extraction in plasma without significant signal loss) and simple to use, providing many direct extractions and subsequent determination of caffeine and its metabolites in biological fluids. In contrast to existing sample preparation methods for the analysis of caffeine and selected metabolites in biological fluids, this feasibility study using a biocompatible SBSE approach was advantageous in terms of simplifying the sample preparation procedures.     

Intermolecular rhodium-catalyzed [2+2+2] carbocyclization reactions of 1,6-enynes with symmetrical and unsymmetrical alkynes

The crossed intermolecular rhodium-catalyzed [2+2+2] carbocyclization of carbon and heteroatom tethered 1,6-enynes can be accomplished with symmetrical and unsymmetrical alkynes, to afford the corresponding bicyclohexadienes in an efficient and highly selective manner.     

A novel class of amide-derived air-stable P,O-ligands for Suzuki cross-coupling at low catalyst loading

The benzamide-derived P,O-ligands efficiently promoted the Pd-catalyzed Suzuki cross-coupling reactions of aryl bromides with phenylboronic acid at 0.01 mol % of Pd loading at 60-80 °C to form biaryls in excellent yields. A sterically hindered arylboronic acid gave a quantitative yield of the coupling product at 110 °C with 1 mol % Pd.